Power

Battery for the VEX IQ Controller.Lithium Ion technology3.7V800 mAhVEX-228-2779

Battery for the VEX IQ Robot Brain.Nickel Metal Hydride technology7.2V2000 mAh

The Robot Battery Charger quickly recharges your robot battery.Charges the Robot Brain's batteryRecharges in 2-3 hoursConvenient desktop cradle designInternational voltage and frequency compatibilityPlease note that 228-2604 power cord is sold separately!VEX-228-2743

The VEX 7.2V Nickel Metal Hydride Battery provides a rechargeable power source for use with your VEX robots. It has the same capacity of the VEX 7.2V NiCad battery with a smaller footprint.Capacity: 2000 mAhRechargeable Nickel Metal Hydride (NiMH)Standard VEX power connectorWARNING: Make sure your charger is capable of charging NiMH Batteries. If using a VEX Charger, the VEX Smart Charger MUST be used to charge this battery! DO NOT use the discontinued VEX Fast Battery Charger to charge NiMH...

This VEX 7.2V Nickel Metal Hydride Battery provides a higher-capacity, rechargeable power source for use with your VEX robots. This is our recommended battery for VEX Robotics Competition robots. Capacity: 3000 mAhRechargeable Nickel Metal Hydride (NiMH)Standard VEX power connectorWARNING: Make sure your charger is capable of charging NiMH Batteries. If using a VEX Charger, the VEX Smart Charger MUST be used to charge this battery! DO NOT use the discontinued VEX Fast Battery Charger to charge...

This Smart Battery Charger is capable of charging up to eight Ni-MH or Ni-Cd rechargeable AA or AAA batteries. Smart Charger technology provides automatic trickle charging and temperature cutoff during the charge cycle while LEDs provide user feedback on the status of each charging battery.Included:8-Bay AA/AAA Smart Battery ChargerPower AdapterVEX-276-1622 Inventor's Guide Insert ...

VEX-276-2520

These Battery Straps are used to mount the 7.2v battery to your robot. The strap is reusable. Two Battery Straps and Mounting Hardware included.VEX-276-2219

Use the VEX Power Expander to add a secondary power source for four of the PWM outputs on the VEX Microcontroller. Balance a robot's motor load across two batteries to extend robot run time and increase performance.FeaturesAttach a 2nd battery to your robotPower up to four (4) Motors or ServosReduce motor load on primary batteryRun your robot for longer!Protected by an Internal Circuit BreakerStatus port provides feedback to MicrocontrollerMonitor when your robot trips its breakerMonitor...

For use with Vex Smart Charger 276-1445VEX-276-1500

The VEX Smart Charger v2 is capable of charging ALL VEX rechargeable power packs. Charges both 7.2V and 9.6V batteriesCharges both NiCd and NiMH batteriesIncludes dual charge rates and an automatic shutoffPlease note that 228-2604 power cord is sold separately! Input Voltage AC 100-240V Output Voltage 20VDC Weight Smart Charger: 0.526 lbs (238.59 grams)Power Cord: 0.162 lbs (73.48 grams)Actual weight of one item (no packaging) WARNING: The VEX Smart Charger MUST be on the SAFE setting to...

The VEXnet Backup Battery allows you to mount and connect a 9V battery. This battery keeps VEXnet alive when the main battery fails.VEX-276-2243

A 6-pack of AAA NiMH Rechargeable Batteries designed for use in the VEXnet Joystick.VEX-276-1696

Extend your runtime by powering your VEXnet Joystick directly from a wall outlet. Simply connect this adapter to the VEXnet Joystick's programming port and you're good to go for hours and hours.VEX-276-1701