Item #: P60K-4444-0004
UPC: 01578082139
Price: $119.99
    Points to Purchase: 17142
    Availability: In Stock
    Usually ships In 1-2 Business Days

    In Stock: 2
    Quantity:
    BaneBots P61 Gearbox Installation - The Robot MarketPlace

    Some assembly required
    Gearbox will be delivered assembled and tested; however, it will need to be disassembled to grease and mount the motor prior to use. No special tools are required, typically only a screw driver and allen wrench. A small arbor press or bench vise is useful for pushing the pinion onto the motor shaft. The gearbox MUST BE GREASED prior to use, grease IS NOT INCLUDED and must be purchased separately. We recommend Mobil XHP 222 Special grease; however, most lithium based ball bearing grease can be used. We do not sell grease separately, it can be readily purchased from most local auto parts stores or online suppliers.

    This gearbox will mount one RS-540, RS-545, RS-550, RS-555 or similar motor.

    MOTOR NOT INCLUDED - Motor must be purchased separately. We highly recommend our Small Johnson V2 motors, or if you wish to have us do it for you, we sell separately the completely assembled PDX gearmotors.

    Gearbox will be delivered assembled and tested; however, it will need to be disassembled to grease and mount the motor prior to use. No special tools are required, typically only a screw driver and allen wrench. A small arbor press or bench vise is useful for pushing the pinion onto the motor shaft. The gearbox MUST BE GREASED prior to use, grease IS NOT INCLUDED and must be purchased separately. We recommend Mobil XHP 222 Special grease; however, most lithium based ball bearing grease can be used. We do not sell grease separately, it can be readily purchased from most local auto parts stores or online suppliers such as MSC and McMaster among others.

    Mounting hardware included Gearbox includes one mounting kit. Mounting kit contains everything required to mount 1 motor including pinion, screws, and lock washers to attach the motor to the gearbox.

    Important Note Mounting a large load to the end of an unsupported shaft may damage the gearmotor. The shafts on these motors are supported by two ball bearings making them fairly rugged; however, we do not recommend them to be used with large overhung loads. We recommend using a design that supports the end of the shaft. If it is not possible to support the end of the shaft, we recommend mounting the load as close to the face of the gearmotor as possible and cutting the shaft to length.

    Maximum torque recommendation We recommend maximum torque not exceed 35 ft-lb for all P60-P61 Series Gearboxes. It is possible to mount motors that will exceed this in higher gear reductions. Higher reduction gearboxes should be utilized primarily for speed reduction. Designs utilizing a P60 gearbox / motor combination that will exceed 35 ft-lb should include a method of limiting torque to prevent damage to the gearbox.

    Features
    • Completely manufactured and assembled in the United States
    • Small size and weight
    • CNC machined components
    • Cold rolled steel gears and hardened 4140 carrier plates
    • Lightweight Aluminum ring gear or optional steel ring gear

    P61 Gearboxes are an upgrade to the proven P60 Series
    • P60 Gearboxes have been discontinued and replaced by the new P61 series.
    • P61 gearboxes are drop-in replacements for the P60s - all external dimensions and mounting are identical.
    • P61 Front Blocks, Shafts, and Output Carrier plates have been redesigned to provide more than a 25% torque capacity increase

    With the exception of Front Blocks, Shafts, and Output Carrier Plates, all P60 and P61 parts are interchangeable.

    Physical Specs
    TypePlanetary
    Reduction256:1
    Stages4 - 4:1, 4:1, 4:1, 4:1
    Planet/Sun Gear MaterialCold Rolled Steel
    Ring gear Material2024 Aluminum
    Gear Specs0.6mod, 20deg PA
    Weight11.4oz (323g)
    Length2.7in. (68.58mm)
    Width (Square) 1.5in. (38.1mm)
    Shaft Diameter 0.50in. (12.7mm)
    Shaft Length 1.5in. (38.1mm)
    Shaft Key 0.125in. (3.2mm)
    Shaft End Tap #10-32
    Mounting Holes (8) #10-32

    0-P60K-4444-0004


    Datasheet