Products 1-38 of 38
Show
20A OPTO Little BLHeli Pro ESC (2-4s)
Price: $16.99
View
Availability: Back Order
Lumenier Item #: LUM6049 -

0-LUM6049

CSR Z-45 Brushless ESC - 45 Amp
Retail: $79.99
Price: $29.99
View
Availability: Discontinued
Common Sense RC Item #: Z-45 -

All Z-series controllers are fully programmable with the throttle stick. Amp Rating 45A Operating Range 2-3 LiPo 6-12 NiCad/NiMH BEC Current 2.2A Length 60mm Width 28mm Height 8mm Weight 1.3oz.   0-Z-45 Instructions ...

DYS 10A Brushless ESC
Price: $10.99
View
(1)
Availability: In Stock
DYS Item #: DYS30010 -

Input voltage: 6-16.8V (2-4S LiPo)BEC: 2A, 5VCurrent: 10A continuous, 12A burst up to 10 sec)Size: 1.02" (26mm) x .905" (23mm) x 0.28" (7mm)Weight: 0.35 oz (10g)Programmable Features:- Brake: enabled/disabled- Battery Type: Lithium/Nickel- Low Voltage Cut-Off Mode: soft cutoff/hard cutoff- Low Voltage Cut-Off: low/medium/high- Startup Mode: normal/soft/super-soft- Timing: low/medium/high0-DYS30010

DYS 20A Brushless ESC
Price: $11.99
View
(1)
Availability: In Stock
DYS Item #: DYS30020 -

Input voltage: 6-16.8V (2-4S LiPo)BEC: 2A, 5VCurrent: 20A continuous, 25A burst up to 10 sec)Size: 1.4" (36mm) x 1.02 " (26mm) x 0.28" (7mm)Weight: 0.77 oz (22g)Programmable Features:- Brake: enabled/disabled- Battery Type: Lithium/Nickel- Low Voltage Cut-Off Mode: soft cutoff/hard cutoff- Low Voltage Cut-Off: low/medium/high- Startup Mode: normal/soft/super-soft- Timing: low/medium/high0-DYS30020 Programming Guide ...

DYS 50a Multicopter ESC
Spotlight!
Price: $17.99
View
Availability: In Stock
DYS Item #: MB30050 -

Model: 50A SK ESCCategories: Speed controllerSpecifications:1.1 Output: Continuous 45A, Instant Current(10s): 55A.1.2 Input Voltage: 7-26V DC Lipo: 2-6S1.3 BEC: OPTO.1.4 Size: 68*27*10mm1.5 Weight: 40g1.6 With SimonK updated firmware for multicopter0-MB30050

DYS 6A Brushless ESC
Price: $10.99
View
Availability: In Stock
DYS Item #: DYS30006 -

FeaturesAchieve positive rotation and rollback through regulating motor wires.Advanced heuristic algorithm applied to meet the requirements for motors with different number of magnetic poles.Secure galvanization Function: Once electrified, the motor won't be started immediately no matter where the throttle rocker on remote controller is put.Lost remote controlled signal protection: When the signal transmitted between emitter and receiver is bad or instable, the aero model may be out of...

DYS 70A Brushless ESC
Price: $29.99
View
Availability: Discontinued
DYS Item #: DYS30071 -

• Compact 70 amp Brushless ESC• No BEC• 70 amps continuous, 85 amps burst• 55mm x 35mm x 8mm, 60g plus 3g bullets• Handles 4-8 LiPo cells• Programmable LiPo or NiMh cutoff• Programmable brake• Low resistanceThis ESC is a great match for large motors that draw up to 70 amps.55 amp Max 6S-7S40 amp Max on 8SProgrammable features include- Brake on, off, soft, medium, hard- LiPo cutoff 4S-8S- Auto NiMh (0.8V per cell)- Throttle setting: auto or 1.1ms to 1.8ms- Soft or hard start- Reversible- Soft...

DYS Burshless Speed Controller 16amp With Blheli Firmware
Price: $11.99
View
Availability: In Stock
DYS Item #: BL16A -

DYS BL16A Mini 16A BLHeli ESC OPTO 2-4s for QAV160 180 250 300 330Item Name:BL16A ESCBEC: NOInput voltage: 2-4s LipoSignal Frequency:20-500HzOutput PWMFrequency:18KHzComes with BLHeli:YesApplication:Compatible with SimonK and BLHeliSize(LxWxH):23x12x4.5mmWeight:7.6gFeatures: Specially for Multi-copter, throttle respond fast; Suit for throttle, which can compatible well with motor; Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and...

DYS Speed Controller 10amp Blheli_S Firmware
Spotlight!
Price: $9.99
View
Availability: In Stock
DYS Item #: XM10A -

DYS XM10A Mini ESC is specially designed for the micro motor with high KV value. Perfectly match with DYS BE1104 KV4000 brushless motors and DYS 3020 Props.Item Name: DYS XM10A Mini ESCInput voltage: 1-3s LipoBEC: NOSize (L*W*H): 23*12*4.5 (mm)Weight: 7.2gModel: mini 10A ESC with BLheli bootloader and BLheli 14.0Signal frequency: 20-500Hz/ Oneshot125 Ultra high speedFirmware:BLHeliContinuouse current: 10AInstant current: 13AFeatures:XM series esc is an upgraded version from SN series, the...

DYS Speed Controller 20amp Blheli_S Firmware
Price: $13.79
View
Availability: Discontinued
DYS Item #: BL20 -

DYS are renown the world over for their quality multi-rotor products, we are now pleased to offer their superb range of electronic speed controllers. Each one is flashed with the BLHeliS bootloader and supports OneShot142 to give the end user some of the best possible software available at this time.The DYS range of speed controllers have been designed specifically with multi-rotors in mind, fast throttle response, ultra low resistance MOSFETs, small and lightweight, a thicker PCB for better...

DYS Speed Controller 40amp With Simon K Firmware
Spotlight!
Price: $13.99
View
Availability: In Stock
DYS Item #: SN40 -

Specially for Multi-copter, fast throttle response;◆ Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable;◆ The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;◆ Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;◆ Minaturization design, SN16/20A with high performance capacitor fliter on the board, weight...

E-flite 2-in-1 Helicopter Brushless ESC/Mixer: BSR
Retail: $49.99
Price: $39.99
View
Availability: Discontinued
Blade Item #: EFLA308H -

2-in-1 Helicopter Brushless ESC/Mixer: BSR0-EFLA308H

E-flite 25-Amp Helicopter Brushless ESC
Retail: $49.99
Price: $39.99
View
Availability: In Stock
E-flite Item #: EFLA325H -

25-Amp brushless speed controller. 3-cell Li-Po. The ESC is not programmable for use in other applications, however, it is equipped with features and functions that optimize its performance for the Blade 400. These features and functions include:“Soft” Low Voltage CutoffThe ESC features a “soft” low voltage cutoff (LVC) that occurs when the battery reaches approximately 9V under load. This helps to prevent “deep” overdischarge of the Li-Po battery during use. Please see the Battery Warnings...

E-Flite 40-Amp Pro Switch-Mode BEC Brushless ESC, V2
Retail: $89.99
Price: $74.99
View
Availability: In Stock
E-flite Item #: EFLA1040B -

E-flite 40-Amp Pro Switch-Mode BEC Brushless ESC (V2) is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. Key Features Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds) 5A continuous current, 5V Switch-Mode BEC Circuit (Proper...

FBL2360A Dual Channel 60A, 60V Brushless Motor Controller
Price: $695.00
View
Availability: Available
RoboteQ Item #: FBL2360A -

The FBL2360A is the latest hardware revision of the FBL2360 motor controller (v2.4). This hardware revision includes support for dual channel resolver feedback for sinusoidal commutation. Also included is a header for an Ethernet connectivity module.Roboteq's FBL2360 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to...

FBL2360AS Single Channel 120A, 60V Brushless Motor Controller
Price: $695.00
View
Availability: Available
RoboteQ Item #: FBL2360AS -

The FBL2360AS is the latest hardware revision of the FBL2360S motor controller (v2.4). This hardware revision includes support for single channel resolver or SSI feedback for sinusoidal commutation. Roboteq's FBL2360AS is a features-packed, high-current, controller for one brushless DC motor. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also...

FBL2360E Dual Channel 60A, 60V Brushless Motor Controller Trapezoidal/Sinusoidal
Price: $795.00
View
Availability: Available
RoboteQ Item #: FBL2360E -

The FBL2360E is the latest hardware revision of the FBL2360 motor controller (v2.4) with Ethernet Connectivity. This hardware revision includes support for dual channel resolver feedback for sinusoidal commutation.Roboteq's FBL2360 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation....

FBL2360ES Single Channel 120A, 60V Brushless Motor Controller Trapezoidal/Sinusoidal
Price: $795.00
View
Availability: Available
RoboteQ Item #: FBL2360ES -

The FBL2360ES is the latest hardware revision of the FBL2360S motor controller (v2.4) with Ethernet Connectivity. This hardware revision includes support for resolver feedback for sinusoidal commutation.Roboteq's FBL2360 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The...

FBL2360T Dual Channel 60A, 60V Trapezoidal/Sinusoidal Brushless Motor Controller
Price: $745.00
View
Availability: Available
RoboteQ Item #: FBL2360T -

Roboteq's FBL2360T is a features-packed, medium-current, dual channel controller capable of driving two brushless DC motors up to 60V and 60A per channel. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motors...

FBL2360TE Dual Channel 60A, 60V Trapezoidal/Sinusoidal Brushless Motor Controller
Price: $825.00
View
Availability: Available
RoboteQ Item #: FBL2360TE -

The FBL2360TE is the latest hardware revision of the FBL2360 motor controller (v2.4) with Ethernet Connectivity and STO. This hardware revision includes support for dual channel resolver feedback for sinusoidal commutation. Roboteq's FBL2360TE is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth...

FBL2360TES Single Channel 120A, 60V Trapezoidal/Sinusoidal Brushless Motor Controller
Price: $825.00
View
Availability: Available
RoboteQ Item #: FBL2360TES -

The FBL2360TES is the latest hardware revision of the FBL2360S motor controller (v2.4) with Ethernet Connectivity. This hardware revision includes support for resolver feedback for sinusoidal commutation.Roboteq's FBL2360TES is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation.The...

FBL2360TS Single Channel 120A, 60V Trapezoidal/Sinusoidal Brushless Motor Controller
Price: $745.00
View
Availability: Available
RoboteQ Item #: FBL2360TS -

Roboteq's FBL2360TS is a features-packed, medium-current, single channel controller capable of driving one brushless DC motor up to 60V and 120A. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motor may...

Fuze 70A Sensorless Brushless ESC Waterproof V2
Retail: $129.99
Price: $74.99
View
Availability: In Stock
Dynamite Item #: DYNS2600 -

FEATURESEasier than ever to toggle between battery chemistriesEasy to program via your transmitter or compact program card. No need to haul around a PCImproved operation under heavy loadsAllows a hard mount, with servo tape and/or velcroWaterproofAuto Cutoff: YesBEC: YesBEC Continous Current: 3ABEC Type: Switch-ModeBEC Voltage: 6VBattery Connector: EC3Battery Input Lead: 14AWG, 6 inBrakes: YesForward: YesFull On Resistance: .0012 ohmHeight: 1.46 in (37mm)Input Voltage: 2-3S LiPo/LiFe, 4-9...

GBL26120 Dual Channel 135A, 120V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $1,095.00
View
Availability: Available
RoboteQ Item #: GBL26120 -

Roboteq's GBL26120 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode, position...

GBL26120S Single Channel 270A, 120V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $1,095.00
View
Availability: Available
RoboteQ Item #: GBL26120S -

Roboteq's GBL26120S is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode,...

GBL2660 Dual Channel 180A, 60V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $895.00
View
Availability: Available
RoboteQ Item #: GBL2660 -

Roboteq's GBL2660 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode, position...

GBL2660E Dual Channel 180A, 60V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $995.00
View
Availability: Available
RoboteQ Item #: GBL2660E -

Roboteq's GBL2660 is a features-packed, high-current, dual channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode, position...

GBL2660ES Single Channel 360A, 60V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $995.00
View
Availability: Available
RoboteQ Item #: GBL2660ES -

Roboteq's GBL2660SE is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode,...

GBL2660S Single Channel 360A, 60V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $895.00
View
Availability: Available
RoboteQ Item #: GBL2660S -

Roboteq's GBL2660S is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode,...

GBL2660SE Single Channel 360A, 60V Brushless Motor Controller Hall Sensors input / Encoder Input
Price: $995.00
View
Availability: Available
RoboteQ Item #: GBL2660SE -

Roboteq's GBL2660SE is a features-packed, high-current, single channel controller for brushless DC motors. The controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure travelled distance inside a 32-bit counter. The motors may be operated in open or closed loop speed mode,...

Great Planes Silver Series 8A Brushless ESC 5V/1A BEC
Retail: $49.99
Price: $29.99
View
Availability: Discontinued
Great Planes Item #: gpmm1800 -

This is the ElectriFly Silver Series 8A Brushless Electronic Speed Control.Great for small, lightweight, high performance airplanesfrom flat-foams to built-up 3Ds. Great for Outrunnerstyle Brushless Motors, delivering 8A of continuouscurrent with a built-in Battery Eliminator Circuit whichcan handle 1.5A. Simple to use and very affordable.FEATURESCompatible with NiCd, NiMH and LiPo batteriesAuto-detects input volts and sets Low-Voltage cutoff8.5kHz switching frequency, for good run-time and...

GWS 25A BLM Brushless Speed Controller
Retail: $34.99
Price: $24.99
View
Availability: Discontinued
GWS Item #: GWESC25A -

Built in Battery Eliminator Circuit (5V-2A) For use with 2-4 Cell LiPo battery or 5-12 cell NiMH or NiCd Specs Continuous Current 25A Burst Voltage 30A Voltage Range 6-18V BEC 5V - 2A Size 40 x 24 x 10 mm Weight 18g (.64oz) 0-GWESC25A Manual ...

KBL1660 Single Channel 120A, 60V Brushless Motor Contoller
Price: $545.00
View
Availability: Available
RoboteQ Item #: KBL1660 -

Roboteq's KBL1660 is a rugged, high-current, features-packed motor controller capable of driving one brushless DC motor up to 60V and 120A. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motor may be operated...

MBL1660A 120A, 60V Brushless Motor Contoller with FOC
Price: $395.00
View
Availability: Available
RoboteQ Item #: MBL1660A -

Roboteq's MBL1660A is a high-current, features-packed motor controller capable of driving one brushless DC motor up to 60V and 120A. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motor may be operated in open...

SBL2360S Single Channel 60A, 60V Brushless Motor Controller
Price: $495.00
View
Availability: Available
RoboteQ Item #: SBL2360S -

Roboteq's SBL23xx is a features-packed, medium-current, dual or single channel controller for brushless DC motors. Available in 30V and 60V versions, the controller can operate in one of several modes in order to sense the rotor position and sequence power on the motors' 3 windings in order to generate smooth continuous rotation. The controller also uses the Hall sensor and/or Encoder information to compute speed and measure traveled distance. The motors may be operated in open or closed loop...

SBL2396 Dual Channel 20A, 96V Brushless Motor Controller
Price: $545.00
View
Availability: Available
RoboteQ Item #: SBL2396 -

Roboteq's SBL2396 is a features-packed, medium-current, dual channel controller capable of driving two brushless DC motors up to 96V and 20A per channel. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The controller can drive sensorless motors in trapezoidal mode.The motors...

SBLM2360T Dual Channel 30A 60V Trapezoidal/Sinusoidal Brushless Motor Controller
Price: $575.00
View
Availability: Available
RoboteQ Item #: SBLM2360T -

Roboteq's SBLM2360 is a features-packed, medium-current, dual channel controller capable of driving two brushless DC motors up to 60V and 30A per channel. The controller can operate in Trapezoidal mode or Sinusoidal mode with Field Oriented Control (FOC). Several sensors types are supported in order to detect the rotor position and sequence power to the motors' 3 windings in order to generate smooth continuous rotation. The motors may be operated in open or closed loop speed mode, position...

Speed Controller 20amp Blheli_S Firmware
Price: $13.99
View
Availability: Discontinued
DYS Item #: XS20A -

The new DYS XS20A is the latest in ESC technology from DYS, with the all new and powerful BLHeli_S firmware.This DYS XS20A is ready to go with the new BLHeli_S firmware and the high performance Silabs EFM8BB2 50MHz MCU chip. With these upgrades you will be able to run motors with high KV as the EFM8BB2 can handle up to 500k eRPM and will allow you to run 1-2ms signal, Oneshot125, Oneshot42 and Multishot.These XS20As follow DYS's latest trend having pads rather than pre-attached wires to allow...